
Cleaning/Disinfecting
During normal use of the POC-195 may become soiled and should, therefore, be cleaned
regularly. Agents: Green tinctured soap and Enzymatic detergents
Steps:
1. Wipe the POC-195 with a clean cloth that has been moistened in the cleaning solution.
2. Prepare agent per manufacturer’s instructions or hospital protocol.
3. Wipe thoroughly with a clean cloth
Cautions Do not immerse or rinse the POC-195 and its peripherals. If you accidentally spill
liquid on the device, disconnect the unit from the power source. Contact your
Biomed regarding the continued safety of the unit before placing it back in
operation.
Do not spray cleaning agent on the chassis.
Do not use disinfectants that contain phenol.
Do not autoclave or clean the POC-195 or its peripherals with strong aromatic,
chlorinated, ketone, ether, or Esther solvents, sharp tools or abrasives. Never
immerse electrical connectors in water or other liquids.
1.3 LCD Specifications
• Display type: 19" TFT LCD.
• Resolution: 1280 x 1024
• Colors: 16.7M (RBG8 bits/color)
• Dot size (mm): 0.294 x 0.294
• Viewing angle: 180°
• Luminance: 300 cd/m2
• Contrast ratio: 1300:1
• LCD MTBF: 50,000 hours
• Backlight lifetime: 50,000 hours
1.4 Dimensions
Figure 1-1: Dimensions of the POC-195
Chapter 2 System Setup
Comentarios a estos manuales