Advantech PCN-6351 Series Manual de usuario descargar pdf (Pagina 32)

Chapter 2 Connecting Peripherals 29

2.19 36-bit LCD Connector (CN17)

The PCN-6351/6351L supports a 36-bit LCD that must be connected

to both CN16 (40-pin) and CN17 (20-pin).

The pin assignments for CN16 and CN17 can be found in Appendix C.

2.20 Ethernet Connector (CN18)

(PCN-6351 only)

The PCN-6351 is equipped with a high performance 32-bit PCI-bus

Fast Ethernet interface which is fully compliant with IEEE 802.3u

100/10Base-T specifications. It is supported by all major network

operating systems.

The medium type can be configured via the RSET8139.EXE program

included on the utility disk. (See Chapter 5 for detailed information.)

2.20.1 RJ-45A connector (CN18)

100/10Base-T networking is available via an adapter cable which

connects to the PCN-6351's RJ-45A standard jack.

2.20.2 Network boot

The Network Boot feature can be built into the BIOS, if required. It

can be enabled/disabled in the chipset setup of the CMOS configura-

tion. Refer to "BIOS Setting" in Chapter 4 for more information.

2.21 CompactFlash™ Socket (CN19)

The PCN-6351/6351L is equipped with a CompactFlash™ disk socket

on the solder side that supports the IDE interface for Compact Flash

Cards. The on-board CompactFlash Socket is designed to prevent

incorrect installation. Be sure that the system power is off when

installing and removing CompactFlash cards.

The CompactFlash card is defaulted as the E: drive on your PC

system.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 100 101

Sin comentarios

Advantech PCN-6351 Series Manual de usuario Pagina 32