search

Advantech PCM-3601 Manual de usuario Pagina 26

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 35
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 25
Page: 25
Chapter 5
V.42bis and MNP Command
This chapter explains ECDC commands and Extended commands,
which are in addition to the basic modem commands listed in the
previous chapter. Some commands have a factory default setting.
Refer to your Getting Started manual for information on default
settings.
5.1 Maximum ECDC Block Size [\A]
\A0 MNP block size 64 characters
\A1 MNP block size 128 characters
\A2 MNP block size 192 characters
\A3 MNP block size 256 characters
5.2 Transmit Break [\B]
\Bn Send n/10 seconds of line break to the modem (n
= 0 ~ 9, default 3)
5.3 Set Break Control [\K]
\K0 Enter command mode, do not send a break signal
to remote (To send a break after use the \B
command)
\K1 Clear data buffer and send a break
\K2 Same as \K0
\K3 Immediately send a break
\K4 Same as \K0
\K5 Send a break in sequence with any data
received from the port
Vista de pagina 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 34 35

Comentarios a estos manuales

Sin comentarios
  • Russell Corporation Aquos Power Acoustik Burnham San Jose Technology
  • Kenwood Hornos Rolls Bastidores Sony Cd radios Asus Estaciones de conexión de hdd / ssd Sharp Relojes de alarma
  • Yamaha RX-497 Electrolux EHS60300P Panasonic ER147 Breville SK500XL Casio CW-L300
  • Sennheiser HDE1030 Manual de usuario Delta 9192T-SD-DST Manual de instrucciones Makita EBH341L Manual de instrucciones Whirlpool COMPACT FREEZER Manual de usuario Sony SSCCM564R Ficha de datos