Advantech PCI-1710UL Manual de usuario Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 84
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
www.advantech.com/products
Online Download
Features
Specifications
Analog Input
Channels 16 single-ended/ 8 differential (software programmable)
Resolution 12 bits
Max. Sampling Rate Multi-channel, single gain: 1 MS/s
Multi-channel, multi gain: 600 kS/s
Multi-channel, multi gain, unipolar/bipolar: 400 kS/s
FIFO Size 1,024 samples
Note: The sampling rate for each channels will be affected by used channel number.
For example, if 4 channels are used, the sampling rate is 600k/4 = 125 kS/s per
channel. (multi gain, without unipolar/bipolar mixed)
Overvoltage Protection 30 Vp-p
Input Impedance 100 M:/10 pF (Off), 100 M:/100 pF (On)
Sampling Modes Software, onboard programmable pacer and external
Trigger Modes Pre-trigger, post-trigger, delay-trigger and about-
trigger
Input Range (V, software programmable) & Absolute Accuracy
Unipolar N/A 0 ~ 10 0 ~ 5 0 ~ 2.5 0 ~ 1.25
Bipolar ±10 ±5 ±2.5 ±1.25 ±0.625
Absolute Accuracy (% of FSR)* 0.1 0.1 0.2 0.2 0.4
* ±1 LSB is added as the derivative for absolute accuracy
Analog Output (PCI-1712 only)
Channels 2
Resolution 12 bits
Output Rate 1 MS/s max.
FIFO Size 32,768 samples
Output Range (Software programmable)
Internal Reference
Bipolar ±5 V, ±10 V
Unipolar 0 ~ 5 V, 0 ~ 10 V
External Reference
0 ~ +x V @ +x V (-10 d x d 10)
-x ~ +x V @ +x V (-10 d x d 10)
Slew Rate 20 V/µs
Driving Capability 10 mA
Output Impedance 0.1 : max.
Operation Mode Static update, waveform generation
Accuracy INLE: ±1 LSB
DNLE: ±1 LSB
Digital Input
Channels 16
Compatibility 5 V/TTL
Input Voltage Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output
Channels 16
Compatibility 5 V/TTL
Output Voltage Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Output Capability Sink: 8.0 mA @ 0.8 V
Source: 0.4 mA @ 2.0 V
Pacer/Counter
Channels 3
Resolution 16 bits
Compatibility 5 V/TTL
Max. Input Frequency 10 MHz
Reference Clock Internal: 10 MHz, 1 MHz, 100 kHz, 10 kHz
External Frequency: 10 MHz max.
General
Bus Type PCI V 2.2
I/O Connector 1 x 68-pin SCSI female connector
Dimensions (L x H) 175 x 100 mm (6.9" x 3.9")
Power Consumption Typical: 5 V @ 850 mA, 12 V @ 600 mA
Max.: 5 V @ 1.0 A, 12 V @ 700 mA
Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Storage Temperature -20 ~ 85°C (-4 ~ 185°F)
Storage Humidity 5 ~ 95% RH non-condensing
Ordering Information
PCI-1712 1 MS/s, 12-bit High-speed Multifunction PCI Card
PCI-1712L 1 MS/s, 12-bit High-speed Multi. PCI Card w/o AO
Accessories
PCLD-8712 DIN-rail Wiring Board for PCI-1712/L
PCL-10168-1E 68-pin SCSI Shielded Cable, 1 m
PCL-10168-2E 68-pin SCSI Shielded Cable, 2 m
ADAM-3968 68-pin DIN-rail SCSI Wiring Board
PCI-1712/L
16 single-ended or 8 differential or a combination of analog inputs
12-bit A/D converter, with up to 1 MHz sampling rate
Programmable gain
Automatic channel/gain scanning
Onboard FIFO memory (AI: 1,024 samples AO: 32,768 samples)
Two 12-bit analog output channels with continuous waveform output function
(PCI-1712 only)
16-ch digital input and 16-ch digital output
Three 16-bit programmable multifunction counter/timers on 10 MHz
Auto-calibration (AI/AO)
PCI-Bus mastering data transfer
Pre-, post-, about- and delay-trigger data acquisition modes for analog input
channels
Flexible triggering and clocking capabilities
1 MS/s, 12-bit, 16-ch PCI
Multifunction DAQ Card
19-25
DAQ Boards
19
Signal Conditioning
20
Industrial USB I/O
Modules
21
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 83 84

Comentarios a estos manuales

Sin comentarios