
www.advantech.com/products
Online Download
Features
11-5
8
5
44
10
Serial Communication
Cards
9
Device Servers &
Gateways
8
Industrial Ethernet
7
Industrial Monitors
6
Automation Panel PCs
Operator Panels
Building Automation
Systems
3
Energy Automation
2
Hazardous Location
1
Motion Control
11
Embedded Auto.
Computers
12
PACs
13
M2M I/O
14
Distributed Nano
Controllers
15
RS-485 I/O
16
Automation Software
Ethernet I/O
17
DAQ Boards
18
Specifications
General
Bus Type Universal PCI v2.2
Connectors 2 x DB9-M
Dimensions (L x W) 123 x 92 mm (4.8" x 3.6")
Power Consumption 300 mA @ +5V
Current-loop Interface (PCI-1603)
Baud-rate 50 ~ 57600 bps
Current Value 20 mA (Standard)
Mode Asynchronous, full duplex
Signal Driver/Receiver 6N136
Signals TxD+, TxD-, RxD+, RxD-
Transmission Distance 1,000 m
Communications
Communications OXuPC1952
Controller
Data Bits 5, 6, 7, 8
Data Signals RS-422: Tx+, Tx-, Rx+, Rx-, RTS+, RTS-, CTS+, CTS-,
GND
RS-485: Data+, Data-, GND
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
FIFO 128 bytes
Flow Control RTS/CTS. Xon/Xoff
IRQ Assigned by Plug & Play
Parity None, Even, Odd
Speed 50 bps ~ 921.6 kbps, any baud rate setting
230.4 kbps (PCI-1601B only)
Stop Bits 1, 1.5, 2
PCI-1601
PCI-1602
PCI-1603
2-port RS-422/485 Universal PCI Communication Card
2-port RS-422/485 Universal PCI Communication Card
with Isolation Protection
2-port RS-232/Current-loop Universal PCI Communication
Card with Isolation Protection
PCI bus 2.2 compliant
Supports serial speed up to 921.6 kbps, and any baud rate setting
2-port RS-422/485 interface (PCI-1601/PCI-1602)
2 independent RS-232 or Current-loop serial ports (PCI-1603)
I/O address automatically assigned by PCI Plug & Play
OS supported: Windows 2K/XP/Vista/7, Windows CE 5.0/6.0, Linux, and QNX
Interrupt status register for increased performance
Protection
ESD Protection 15 KV
Isolation Protection 2,500 V
DC
Surge Protection 1,000 V
DC
Software
Bundled Software ICOM Tools
OS Support 32-bit/64-bit Windows 2000/XP/Vista/7,
Windows CE 5.0/6.0, Linux, and QNX
Environment
Humidity (Operating) 5 ~ 95 % RH, non-condensing
Operating Temperature -10 ~ 60°C (14 ~ 144°F)
Storage Temperature -25 ~ 85°C (-13 ~ 185°F)
Regulatory Approvals
EMC EN 55022, EN 61000-3-2, EN 61000-3-3, EN 55044
including (IEC 61000-4-2/3/4/5/6/8/11), FCC Part 15
Subpart B
Ordering Information
PCI-1601A 2-port RS-422/485 PCI Comm. Card
PCI-1601B 2-port RS-422/485 PCI Comm. Card w/Surge
PCI-1602 2-port RS-422/485 PCI Comm. Card w/Iso
PCI-1603 2-port RS-232/Current Loop PCI Comm. Card w/Iso
Introduction
The PCI-1601 and PCI-1602 are two port RS-422/485 PCI communication cards that are compatible with the PCI 2.2 bus specification. Both cards provide EFT protected RS-422/485
ports, and come with features such as: high transmission speed of 921.6 kbps, optional isolation protection, windows utility software and more. The cards also come with high-
performance OXuPC1952 UART with a 128-byte FIFO to reduce CPU load. This makes the PCI-1601 and PCI-1602 especially suitable for multitasking environments.
The PCI-1603 offers a versatile range of high-speed interfacing options. You can switch its ports between the popular RS-232 or noise-resistant current-loop. The card utilizes
OXuPC1952 UARTs with 128-byte FIFO buffer for faster and more reliable communication, especially under multi-tasking environments such as Windows operating systems. The
card utilizes OXuPC1952 UART that buffers data into packets before sending it to the bus. This drastically reduces CPU load and avoids data loss when the system is busy and cannot
process an interrupt quickly. These FIFO buffers make the PCI-1603 especially suitable for high speed serial I/O under Windows.
PCI-1602PCI-1601
PCI-1603
RoHS
COMPLIANT
2002/95/EC
Comentarios a estos manuales