
Features
6-12
Plug-in DA&C Cards
Specifications
Analog Input
Channels 16 Single-Ended
Resolution 12-bit
FIFO Size 1K samples
Sampling Rate* 100 kS/s max.
Input range and
Gain List
Gain
1 2 4 8 16
Input
± 10 V ± 5 V ± 2.5 V ± 1.25 V ± 0.625 V
Drift (ppm/°C)
Gain
1 2 4 8 16
Zero
15 15 15 15 15
Gain
25 25 25 30 40
Small Signal
Bandwidth for
PGA
Gain
1 2 4 8 16
Bandwidth
4.0 MHz 2.0 MHz 1.5 MHz
0.65
MHz
0.35
MHz
Max. Input Overvoltage 20 V
Input Protect 30 Vp-p
Input Impedance 2 MΩ/5 pF
Trigger Mode Software, On-board Programmable Pacer or external
Accuracy
DC
INLE: ±0.5 LSB
Monotonicity: 12 bits
Offset error: Adjustable to zero
Gain error: 0.005% FSR (Gain=1)
AC
SNR: 68 dB
ENOB: 11 bits
Programmable Counter / Timer
Channels 1
Resolution 16-bit
Compatibility TTL level
Base Clock 10 MHz
Max. Input Frequency 10 MHz
Note:
The sampling rate and throughput depends on the computer hardware architecture and
software environment. The rates may vary due to programming language, code efficiency,
CPU utilization and so on.
16 single-ended analog inputs
12-bit A/D converter, with up to 100 kHz sampling rate
Programmable gain for each input channel
Automatic channel/gain scanning
On-board 1K samples FIFO buffer
Two 12-bit analog output channels (Only for PCI-1711)
16 digital inputs and 16 digital outputs
Programmable pacer/counter
PCI-1711
PCI-1711L
100 kS/s, 12-bit, 16-ch S.E. Inputs Low-cost
Multifunction Card
100 kS/s, 12-bit, 16-ch S.E. Inputs Low-cost
Multifunction Card w/o AO
Analog Output (only for PCI-1711)
Channels 2
Resolution 12-bit
Output Range
(Internal & External
Reference)
Internal Reference
0 ~ +5 V, 0 ~ +10 V
External Reference
0 ~ +x V @ -x V (-10 ≤ x ≤ 10)
Accuracy
Relative
±1/2 LSB
Differential Non-linearity
±1/2 LSB
Gain Error Adjustable to zero
Slew Rate 11 V/µs
Drift 40 ppm/° C
Driving Capability 3 mA
Throughput PC dependent, Software update (direct AO)
Output Impedance 0.81 Ω
Settling Time 26 µs (to ±1/2 LSB of FSR)
Reference Voltage Internal -5 or -10 V
External -10 or +10 V
Digital Input / Output
Input Channels
16
Input Voltage
Low
0.8 V max.
High
2.0 V max.
Output Channels
16
Output Voltage
Low
0.8 V max.@ 8.0 mA (sink)
High
2.0 V min.@ -0.4 mA (source)
General
I/O Connector Type
68-pin SCSI-II female
Dimensions
175 x 100 mm (6.9” x 3.9”)
Power Consumption
Typical
PCI-1711 PCI-1711L
+5 V @ 850 mA +5 V @ 700 mA
Max.
+5 V @ 1.0 A
Temperature
Operation
0 ~ 60° C (32 ~ 140° F)
(refer to IEC 68-2-1, 2)
Storage
-20 ~ 70° C (-4 ~ 158° F)
Relative Humidity
5 % ~ 95 % RH non-condensing (refer to IEC 68-2-3)
PCLD-8710
PCI-1711/1711L
Introduction
PCI-1711 and PCI-1711L are powerful, but low-cost multifunction cards for the PCI bus. PCI-1711 comes with 2 analog output channels, while the PCI-1711L doesn’t. Thus,
PCI-1711L represents a cost saver for those that do not need analog output.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Comentarios a estos manuales