Advantech ADAM-4577 Especificaciones Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 11
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
6-9
www.advantech.com/products/ADAM-4570.asp
Introduction
The ADAM-4570L/4571L is a cost-effective data gateway between RS-
232 and Ethernet interfaces. It provides a quick and low-cost way to
connect any RS-232 device into Ethernet. Functionally transparent and
efficient, the ADAM-4570L/4571L makes the users save a lot of cost by
allowing the use of existing H/W & S/W. The ADAM-4570L/4571L brings
the advantages of remote management and data accessibility to
thousands of RS-232 devices that cannot connect to the network.
The ADAM-4570L/4571L provides one or two RS-232 serial ports. The
transmission speed of the ADAM-4570L/4571L is up to 230 Kbps,
meeting the demands for high-speed exchange. In addition, users can
use Windows
®
utilities to configure the ADAM-4570L/4571L without
further programming. The ADAM-4570L/4571L not only protects your
current hardware investment but also ensures future network
expandability. Since the protocol conversion is transparent, all your
existing devices can be seamlessly integrated with an Ethernet
network.Therefore, the ADAM-4570L/4571L can be used in a security
system, factory automation, SCADA, transportation and more.
The ADAM-4570L/4571L integrates both your existing human-machine
interface software (HMI) and the RS-232 system architecture with an
Ethernet network. The result helps you save cabling space and software
development cost. Another benefit is the ADAM-4570L/4571L allows
users to remotely download programs to a designated device via
Ethernet. This reduces the need for on-site maintenance and diagnosis.
In addition, the ADAM-4570L/4571L comes with a Windows
®
configuration and port-mapping utility. The configuration tool can auto-
detect all Ethernet Data Gateway products on the local network. It also
lets you adjust all settings easily. The port mapping utility helps you to
set up COM ports for one Windows
®
95/98/NT/2000/XP platform. This
helps users manage all ports to meet their needs.
Specifications
Protocol: TCP/IP,
Network: 10/100Base-T standard
Port: 1/2 Independent RS-232 ports
Connector:
Network: RJ-45
ADAM-4570L
ADAM-4571L
2-port Ethernet to RS-232 Data Gateway
1-port Ethernet to RS-232 Data Gateway
Serial: RJ-48 (ADAM-4570L)
DB-9 (ADAM-4571L)
Transmission speed: 300 bps to 230 Kbps
Parity bit: odd, even, none, space, mark
Data bit: 5, 6, 7, 8
Stop bit: 1, 1.5, 2
Diagnostic LEDs:
Network: Tx/Rx, Link , Speed (10/100 Mbps), Power
Serial: Tx/Rx, Status
Utility Software:
Auto-detecting configuration utility
Easy-to-manage port mapping utility
Driver Supported: Windows
®
95/98/NT/2000/XP
Power Requirements: unregulated 10 to 30 V
DC
Power Consumption:
3 watt (ADAM-4570L)
2 watt (ADAM-4571L)
Placement: DIN-rail, panel mounting, piggyback stack
Operating Temperature: 0 to 60° C (32° ~ 140° F)
Storage Temperature: -20 to 80° C (-4° ~ 176° F)
Operating Humidity: 20 to 95% (non-condensing)
Storage Humidity: 0 to 95% (non-condensing)
Ordering Information
ADAM-4571L
1-port Ethernet to RS-232 Data Gateway
ADAM-4570L
2-port Ethernet to RS-232 Data Gateway
(RJ48 to DB9 cable, 1 m)
Opt1A
30 cm RJ48 to male RS-232/422/485 cable
Features
Supports 10/100 Mbps Base-T standard
Supports high transmission speeds up to 230 Kbps
Supports an advanced security mechanism to avoid
unauthorized access
Auto-reconnect when Network breaks
Remote download firmware: Easy to maintain
Auto-detecting Configuration Utility
Easy managing Port Mapping Utility
Supports Windows
®
95/98/NT/2000/XP/ME driver
NEW
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10 11

Comentarios a estos manuales

Sin comentarios