Advantech PCI-1739U Manual de usuario descargar pdf (Pagina 23)

13 Chapter 2

2.3 Hardware Installation

After the Device Drivers installation is completed you can install the PCI-

1737U/PCI-1739U card into any PCI slot on your computer. A complete

device installation procedure should include device setup, configuration

and testing. The following sections will guide you through the Setup,

Configuration and Testing of your device. However, it is suggested that

you refer to the computer’s user manual or related documentation if you

have any doubts. Please follow the steps below to install the card.

1. Turn off your computer and unplug the power cord and cables.

2. Remove the cover of your computer.

3. Remove the slot cover on the back panel of your computer.

4. Touch the metal part on the surface of your computer to neutralize the

static electricity that might be on your body.

5. Insert the PCI-1737U/PCI-1739U card into a PCI slot. Hold the card

only by its edges and carefully align it with the slot. Insert the card firmly

into place.

6. Fasten the bracket of the PCI card on the back panel rail of the com-

puter with screws.

7. Connect appropriate accessories (50-pin flat cable, wiring terminals,

etc. if necessary) to the PCI card.

8. Replace the cover of your computer chassis. Re-connect the cables you

removed in step 2.

9. Plug in the power cord and turn on the computer.

After your card is properly installed on your system, you can now config-

ure your device using the Advantech Device Manager Program that has

itself already been installed on your system during driver setup.

Note: Make sure you have installed the driver before

you install the card (please refer to chapter 2.2

Driver Installation)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 45 46

Sin comentarios

Advantech PCI-1739U Manual de usuario Pagina 23