Advantech PCI-1761 Manual de usuario descargar pdf (Pagina 17)

11 PCI-1761 User Manual

Chapter 2 Installation

2.5 Hardware Installation

After the DLL driver installation is completed, you can now go on to install the PCI-

1761 card in any PCI slot on your computer. But it is suggested that you should refer

to the computer user manual or related documentation if you have any doubt. Please

follow the steps below to install the card on your system.

1. Turn off your computer and unplug the power cord and cables. TURN OFF your

computer before installing or removing any components on the computer.

2. Remove the cover of your computer.

3. Remove the slot cover on the back panel of your computer.

4. Touch the metal part on the surface of your computer to neutralize the static

electricity that might be on your body.

5. Insert the 1761 card into a PCI slot. Hold the card only by its edges and carefully

align it with the slot. Insert the card firmly into place. Use of excessive force

must be avoided, otherwise the card might be damaged.

6. Fasten the bracket of the PCI card on the back panel rail of the computer with

screws.

7. Connect appropriate accessories (37-pin cable, wiring terminals, etc. if neces-

sary) to the PCI card.

8. Replace the cover of your computer chassis. Re-connect the cables you

removed in step 2.

9. Plug in the power cord and turn on the computer .

After the PCI-1761 card is installed, you can verify whether it is properly installed on

your system in the Device Manager:

1. Access the Device Manager through Control Panel/System/Device Manager.

2. The device name of the PCI-1761 should be listed on the Device Manager tab

on the System Property Page.

Note! Make sure you have installed the driver first before you install the card

(please refer to 2.4 Driver Installation)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Sin comentarios

Advantech PCI-1761 Manual de usuario Pagina 17