Advantech PCI-1757UP Especificaciones descargar pdf (Pagina 17)

Chapter 2 Installation 13

If the jumper JP1 is at lower (1, 2) position and the initial configuration

is caused by a reset, all ports will return to the states they had just prior

to the reset. The reset must be a "hot" reset (power not disconnected)

for enabled JP1 to return ports to their prior values. Otherwise, the card

behaves as though JP1 were not enabled.

2.4 Pin Assignments

Description of pin use:

Mode Description Pin

PA0 ~ PA7 I/O pins of Port A Pin 1~8

PB0 ~ PB7 I/O pins of Port B Pin 9~16

PC0 ~ PC7 I/O pins of Port C Pin 17~24

GND Ground Pin 25

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 28 29

Sin comentarios

Advantech PCI-1757UP Especificaciones Pagina 17