Advantech ACP-2010MB Manual de usuario descargar pdf (Pagina 20)

ACP-2010MB User Manual 10

2. Users can find the stand-off bracket (see Figure 2.3) in the acces-

sory box. Be sure to follow the instruction and fasten the mother-

board onto the chassis with the stand-off bracket locations.

3. Attach the motherboard I/O shielding onto the rear plate first. Then

fasten the motherboard onto the chassis. (see Figure 2.4)

4. Connect the 20-pin (or 24-pin) ATX power connector and the 4-pin

+12V power connector from the power supply to the motherboard

5. Connect the 9-pin USB wire, PS/2 wire, Power switch wire, and the

System Reset switch wire from the chassis to the motherboard.

Figure 2.3: Stand-off bracket

Figure 2.4: Installing a motherboard

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 45 46

Sin comentarios

Advantech ACP-2010MB Manual de usuario Pagina 20