Advantech PCM-9386 Manual de usuario descargar pdf (Pagina 32)

EBPC-3500 User Manual 24

4.4 Replacing the Power Board

The EBPC-3500 power is provided by the power board. Connect the EBPC-3500 to a

12~24 V

power source. The power source can be either from a power adapter or

an in-house power source. To replace the power board, proceed as follows:

1. Unplug the DC adapter from the chassis.

2. Remove the top cover.

3. Unplug the 10-pin power connector from the power board.

4. Fasten a new power board onto the chassis.

5. Plug the 10-pin power connector to the power board.

6. Return the top cover and fasten it, finally plug in the DC adapter.

Figure 4.5 Replacing the power board

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38

Sin comentarios

Advantech PCM-9386 Manual de usuario Pagina 32