Advantech PCI-1680U Manual de usuario descargar pdf (Pagina 27)

21 Chapter 3

3.3 Card Installation

1. Turn off the computer.

2. Turn the power off to any peripheral devices (such as printers and

monitors).

3. Disconnect the power cord and any other cables from the back of

the computer.

4. Turn the PC if necessary to gain access to the cables.

5. Remove the PC’s cover (refer to your user’s guide if necessary).

6. Locate the expansion slots or passive back-plane (at the rear of the

PC) and choose any unused slot.

7. Remove the screw that secures the expansion slot cover to the PC

(save the screw to secure the interface card retaining bracket).

8. Remove the anti-vibration card clamp if supplied.

9. Carefully grasp the upper edge of the PCI communication card.

10. Align the hole in the retaining bracket with the hole on top of the

expansion slot.

11. Align the gold striped edge connector with the expansion slot

socket.

12. Press the board firmly into the socket.

13. Replace the screw in the expansion slot’s retaining bracket.

Note: Make sure you have installed the driver before

installing the card. We strongly recommend

that you install the software driver before

installing the hardware into your system, since

this will guarantee a smooth and trouble-free

installation process.

Warning! Turn off your PC’s power supply whenever you

install or remove the PCI communication card or its

cables. Static electricity can easily damage com-

puter equipment. Ground yourself by touching the

chassis of the computer (metal) before you touch

any boards.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Sin comentarios

Advantech PCI-1680U Manual de usuario Pagina 27